Sauna installer based in Burbank, serving Glendale and nearby — barrel, cube, cabin and infrared saunas from any brand. Assembled, wired to your prepared 240V line, commissioned.
Insured & Bonded · Owner-Operated · Also serving Burbank, La Crescenta-Montrose, La Cañada Flintridge, Los Feliz, Pasadena
Sauna Installer in Glendale
How It Works
Tell Us About Your Sauna
Send the brand, model, heater rating and photos of the spot. We tell you what the install involves and what to watch for, then give you an estimate.
Assembly & Hookup
Walls or staves, roof, door, benches, heater and controls — connected to the 240V line your electrician prepared. One day for barrels and cubes, two to three for cabins.
Commissioning & Handover
First heat-up, leak and heat check, controls walk-through. The 240V line, permits and the pad stay with your electrician and contractor — separate contracts.
What We Install in Glendale
We install factory-built saunas — you buy the unit, we assemble it, connect it and hand it over working.
- Barrel saunas — one day on a prepared pad.
- Cube and modular saunas — one day for most, two for larger units.
- Cabin saunas — two to three days.
- Infrared saunas — about half a day, indoors or on a covered patio.
- Hybrid saunas — traditional heater plus infrared panels, both systems commissioned.
Any brand. Most often SaunaLife, Auroom, Redwood Outdoors, Harvia and Almost Heaven. We don't sell kits and we aren't tied to a dealer.
What Affects the Cost
- Type and size of the unit.
- Access to the spot — carry distance, gate width, stairs, slope.
- Whether the pad, deck or slab is ready.
- Heater rating and how far the prepared 240V line is from the unit.
- Whether the kit is still crated or already partly assembled.
Send the brand, model, heater rating and photos of the spot — we'll tell you what the install involves and give you an estimate.
Questions We Get
Do I need a permit?
That depends on the unit and where it sits, and the city decides. We don't pull permits. Permits and the electrical line stay with your own contractor and electrician, as separate contracts.
Who runs the 240V line?
Your licensed electrician, before we arrive. We connect the heater and controls to the prepared line and commission the sauna.
How long does it take?
One day for a barrel or cube, two to three for a cabin, about half a day for an infrared unit. Hauling the packaging away is a separate charge.
Will you install a sauna you didn't sell?
That's the only kind we install. Installation only — no kit retail, no custom builds.
Do you work outside Glendale?
Yes — across Pasadena, the San Fernando Valley and the Westside.
Recent installs
Prefab cube sauna on a backyard deck — glass front, ready to use.
Same install from above — cube on the lower deck, landscaping intact.
Barrel sauna with porch seating — assembled and leveled on a pad.
Cabin sauna on a concrete pad — glass door, interlocking timber.
Cabin interior after assembly — panoramic window, LED lighting.
HUUM heater in, stones loaded — looking out to the pool.
Finished benches, vent, and HUUM DROP — handover-ready interior.